LITEON DH-20A3P BurnQuality Test


日本語ページ / English page

Page.1 / Page.2



Back to TOPPAGE

Drive Feature




Model DH-20A3P
Seller LITEON
Release date 16.August.2007
Market price 4480JPY($38.6)
($1 = 116JPY)


Features
Manufacturer name ATAPI DVD A
Drive name DVDRW DH-20A3P
Initial Firmware ver. XP5Q
Drive Buffer 2MB
PIO/DMA mode UltraDMA mode-4
Main Chip MediaTek MT1858L
Country of origin CHINA
Power consumption 5V = 1.5A / 12V = 1.5A
QualityScan Function yes. however, jitter is not available.
Maximum DVD write speed 20X
Maximum DVD DL write speed 8X
Maximum DVD RW write speed 8X(6X)
Maximum DVD-ROM read speed 8X
Maximum DVD-R read speed 16X
Maximum DVD DL read speed 12X
Maximum DVD(with CSS) read speed 8X limited
(sorry, maybe)no limit.
Maximum CD write speed 48X
Maximum CD RW write speed 32X
Maximum CD read speed 48X
Overburn DVD+R Disabled
Overburn CD-R -
Maximum DVD-RAM(2x-3x) read speed 5X CLV
Maximum DVD-RAM(5x) read speed 5X CLV
Bitsetting DVD+R available.
DVD+RWディスクのROM化 available.
Bitsetting DVD+R DL Forced DVD-ROM
recording time for DVD-R 8x -
recording time for DVD-R 18x about 5m10s.
software Nero 7 ESSENTIALS


Write speed & behavior
20X DVD-R 8.3x-19.9x CAV(20x) / 7.5x-18.0x CAV(18x)
6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
20X DVD+R 8.3x-19.9x CAV(20x) / 7.5x-18.0x CAV(18x)
6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
18X DVD-R 7.5x-18.0x CAV(18x) / 6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
18X DVD+R 7.5x-18.0x CAV(18x) / 6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
16X DVD-R 6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
16X DVD+R 6.7x-16.1x CAV(16x) / 5x-8x P-CAV(8x)
6x CLV / 4x CLV
8X DVD-R 5x-8x P-CAV(8x) / 6x CLV / 4x CLV
8X DVD+R 5x-8x P-CAV(8x) / 6x CLV / 4x CLV
4X DVD-R 4x CLV / 2x CLV
4X DVD+R 4x CLV / 2.4x CLV
1X DVD-R 2x CLV
2.4X DVD+R 2.4x CLV
6X DVD-RW 6x CLV / 4x CLV
4X DVD-RW 4x CLV
2X DVD-RW 2x CLV
8X DVD+RW
4X DVD+RW 4x CLV
2.4X DVD+RW 2.4x CLV
8X DVD+R DL 4x-6x-8x ZCLV(8x) / 4x-6x ZCLV(6x)
4x CLV
4X DVD+R DL 4x CLV / 2.4x CLV
2.4X DVD+R DL 2.4x CLV
8X DVD-R DL 4x-6x-8x ZCLV(8x) / 4x-6x ZCLV(6x)
4x CLV
4X DVD-R DL 4x CLV / 2x CLV
12X DVD-RAM
5X DVD-RAM
3X DVD-RAM
-


Drive Information



Read performance
RPL-Burst
Digital
RPL-Burst
Analog






Sound Level test.
This graph is a measurement of the noise value.
Test is usually recorded from a position left from the front side part of the drive bezel by about 13cm(width in one with a short jewel case).
Tested with IEC651 TYPE2 standard sound level meter.

A characteristic(blue line) is high frequency noise.
C characteristic(red line) is low frequency noise.

If C and A are almost the same values, the drive is howling that sounds high.
If C(red line) is much higher than A(blue line), the drive emits a jarring sound that sounds low.


Comparison to other drives.
20X




Peak A freq.
56.0dB

Peak C freq.
61.8dB
18X




Peak A freq.
55.6dB

Peak C freq.
61.9dB
16x




Peak A freq.
51.8dB

Peak C freq.
54.0dB
8x




Peak A freq.
46.7dB

Peak C freq.
51.9dB
result DH-20A3P is more quiet than LH-20A1S @ under 16x speed.
However, this drive suddenly become noisy @ over 18X speed.
I have not seen such a noisy drive still before......
C freq 61.9dB ...... this is as noisy as large helicopter of the Self Defense Force flying over the sky


and more...

*Drive manufacturer name is "ATAPI  DVD A". not "LITEON".

*DVD-VIDEO with CSS reading speed is 8X.
*I tried 5 other disks, two of these were 8x speed, other two reached 16x speed, and last 1 was 12x speed......
Maybe, my DH-20A3P has initial malfunction.

(ex) 8x speed.


(ex) 16x speed.




・DVD+R Overburn is not available.




Externals and Chipset.
 
Click to enlarge.
DH-20A series is not BenQ-like design, this seems legacy LITEON design.
MFD is July.2007. Made in CHINA.




Position of LED and eject hall ware changed. Therefore, this bezel is not compatible with LH-20A model.




Initial position of jumper pin is Slave.



DH-20A3P      /      LH-20A1S
 
Internal image. LEFT is DH-20A3P, RIGHT is LH-20A1S. click to enlarge.
Main chipset(Mediatek MT18xx) is not found on DH-20A3P board.
DH-20A3P put main chip on the other side of the base.(click to extent.)


LH-20A1S has the chip printed "ESMT". This is memory chip for data buffering,
however, DH-20A3P seems not to have the buffer memory. this is because, 2MB memory is built into MT1858.